We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 1504

XACT-CPLD: Need two Project.lst files if using both XACT and XACT-CPLD and PROflow


Keywords: XACT, CPLD, project.lst

Urgency: Standard

General Description:
After successfully FPGA implementating using ProSeries and Xact 6.0.1 and
then switching all the environment variables to refer to the XACT_CPLD tools,
ProFlow complains about an invalid or unreachable project.lst file.


Apparently the only working solution is to have 2 separate project files:
one for FPGA Development (XACT) and one for CPLD Development (XACT-CPLD).

Copy the desired one to c:\proser\standard\vf\project.lst, depending on
which development tools you are using.
AR# 1504
日期 10/07/2008
状态 Archive
Type 综合文章