We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1507

Foundation: Adding parts and speed grades to the selection menus


Keywords: speed, foundation, parts

Urgency: Standard

General Description:
Periodically, Xilinx may release new data files to support
additional packages or speed grades, in the form of the
*.PKG or *.SPD files.

These files will only update the M1 Design Manager, and
will not update the Foundation Project Manager. Therefore,
the user will still not be able to select these parts from
the Foundation Project Manager menus.


To add new parts and/or speed grades to the Foundation
Project Manager, edit the M1.FAM found in the
ACTIVE\EXE directory.

Add the new parts as shown below.

To add 4025EPG299-3 and -4, add the following line below the
[XC4000E] header:

4025EPG299=3, 4

If you then wanted to add the -2 speed grade, modify it:

4025EPG299=2, 3, 4

AR# 1507
日期 08/12/2003
状态 Archive
Type 综合文章