UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15481

5.1i Timing Analyzer - A TSI report that lists the sources for an OFFSET IN constraint differs from TRCE

描述

General Description:

When I run the TSI report from Timing Analyzer, the following information is reported:

Timing constraint: OFFSET = IN 20 nS BEFORE COMP "clk"

================================================================

Section 1: Sources and destinations covered exclusively by the current constraint.

Sources:

I$16 I$17 I$8

Destinations:

ff1d (Timegroup(s): clk) ff1s (Timegroup(s): clk)

ff1s (Timegroup(s): clk) ff2d (Timegroup(s): clk)

ff2s (Timegroup(s): clk) ff2s (Timegroup(s): clk)

The source and destination names do not match up with TRCE.

解决方案

This problem is fixed in the latest 5.1i Service Pack, available at:

http://support.xilinx.com/support/techsup/sw_updates

The first service pack containing the fix is 5.1i Service Pack 1.

AR# 15481
日期 01/18/2010
状态 Archive
Type 综合文章
的页面