UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1549

Foundation: Selecting Using Help gives "not enough memory"

Description

Under Windows 3.11, selecting Help -> Using Help in the HDL
Editor generates the following message from Windows:

There is not enough memory available for this task.
Quit one or more programs to increase available memory,
and then try again.

解决方案

The root cause of the error is usually NOT memory related.

The cause is that the HDL Editor help file was created for
WINHELP version 4.00.950 or greater. The version of WINHELP
that comes with Windows 3.11 is 3.10.425.

The HDL Editor can open the help file, but the "Using Help"
file was not included for this later version of WINHELP.

To be able to access the Help -> Using Help file from the HDL
Editor, upgrade the WINHELP program. WINHELP.EXE is found in
the WINDOWS directory. Version 4.00.950 of WINHELP comes
with Windows 95 and will run on Windows 3.11.
AR# 1549
创建日期 11/26/1996
Last Updated 03/03/1999
状态 Archive
Type 综合文章