UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15498

5.1i iMPACT - In batch mode, a message reports "ERROR: iMPACT:880 - The bit file...does not have the startup clock set to 'JtagClk'..."

描述

General Description:

When I load a CDF file in batch mode in order to create a PROM file, and I use the "impa.cmd" file created by the ISE software, iMPACT reports the following errors:

"command line: impact -batch impa.cmd

// *** BATCH CMD : adddevice -p 1 -file xcv50

'1': Loading file '.\myfile.bit' ...

done.

INFO:iMPACT:1366 - Reading C:/Xilinx/virtex/data\xcv50.bsd...

ERROR:iMPACT:880 - The bit file '.\myfile.bit' does not have the startup clock set to 'JtagClk'. Please re-generate the bit file with the startup clock option set to 'JtagClk' or toggle the CCLK manually."

解决方案

The error is valid if you are attempting to create a JTAG programming chain; however, if you are attempting to create a PROM programming file, this error is being incorrectly reported.

This problem is fixed in the latest 5.1i Service Pack, available at:

http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing this fix is 5.1i Service Pack 1.

AR# 15498
日期 12/15/2012
状态 Active
Type 综合文章
的页面