UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1553

OrCAD Capture 7.0: How to add the net attributes?

Description

In the OrCAD SDT 386+(DOS) and Capture 6.x tools, the user could not assign a property to a net. Hence there were symbols in the Xilinx library to do that. In capture 7.0, that limitation is gone and hence the symbols are removed from the Xilinx libraries.

解决方案

EXAMPLE:
To add the 'X' symbol to a net, do the
following:

1) Edit the properties of the net by double clicking on it.
2) Select User Properties.
3) Select New.
4) Give any name you want and the value of X.
5) When you create a XNF netlist the property will be put on
the correct net of the XNF file.


For a complete description of using Capture with XACT Step tools, please download the App Note 12 (http://www.orcad.com/an/an_12a.htm) from the OrCAD Web site.

http://www.orcad.com
Technical Support -> Application Notes -> Using OrCAD Capture and Simulate with Xilinx XACT Step(AN #12)
AR# 1553
创建日期 11/26/1996
Last Updated 09/12/2000
状态 Archive
Type 综合文章