AR# 15597


4.2wp3 WebPACK, iMPACT - When I attempt to program a Virtex-II device in slave serial mode, an error reports: "iMPACT FATAL_ERROR: GuiUtilies: WinApp.c:570"


Keywords: slave serial, WebPACK

Urgency: Standard

General Description:
When I attempt to program in slave serial mode with iMPACT (WebPACK 4.2 WP3.0), the following error is reported:

"FATAL_ERROR:GuiUtilies: WinApp.c:570 -- This application has discovered an exceptional condition from which it cannot recover.
Process will terminate."


(This problem only affects the WebPACK 4.2WP3.0 version of iMPACT.)

You can successfully program the Virtex-II device without problems by using the full version of 4.2i sp3 iMPACT.

This is fixed in the WebPACK 5.1WP0.0 version of iMPACT.
AR# 15597
日期 01/19/2004
状态 Archive
Type 综合文章
People Also Viewed