UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1568

XNFMERGE 5.2.0: FAST, MEDFAST, MEDSLOW properties dropped when attached to OFD/OUTFF/OBUF/OBUFT macros

Description

There is currently a bug in XNFMERGE 5.2.0 where FAST, MEDFAST, and MEDSLOW
properties are lost when they are attached to OFD, OUTFF, OBUF, or OBUFT
macros in schematic designs done in all schematic entry platforms, except
for Viewlogic. The problem is not seen in Viewlogic because the Viewlogic
output buffer and register macros have a special EXT property attached to the
underlying buffer and register primitives that define them to be external.

解决方案

1

The workaround is to avoid the use of macros when specifying FAST, MEDFAST,
or MEDSLOW slew rates in your design.

For 4000E: attach the attribute to OBUFT, OBUF, or OFDX only
For 3000A: attach the attribute to OBUFT, OBUF, or OFD

Attaching the attribute to a multiple-component macro such as OFD16,
for example will not work--you must instantiate each output individually.

2

You can also add these properties manually to the appropriate EXT records
in the .XTF file produced by XNFPREP.

Example:

Say you want an output signal called "sig1" to go through
an output configured in FAST mode:


original EXT record:

EXT, sig1, O,

Modified EXT record:

EXT, sig1, O,, FAST


Note that the two commas following the "O" are required. The first
comma is a reserved delimiter for the LOC= ("location") field.



To set it to MEDFAST:

EXT, sig1, O,, MEDFAST


To set it to MEDSLOW:

EXT, sig1, O,, MEDSLOW
AR# 1568
创建日期 08/31/2007
Last Updated 10/07/2008
状态 Archive
Type 综合文章