UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15764

5.1i ISE - The Project Navigator GUI does not launch on a Solaris machine, reporting an "Arithmetic Exception" error

描述

Keywords: Solaris, 5.1i, Arithmetic, Exception, Project, Navigator, ISE, UNIX

Urgency: Standard

General Description:
When I type "ise" to open ISE 5.1i on a Solaris system, the GUI fails to launch and reports an "Arithmetic Exception" error.

解决方案

This problem occurs when ISE and /usr/dt/bin/sdtaudiocontrol are used from the same shell.

Project Navigator will not run if /usr/dt/bin/sdtaudiocontrol is activated first, although implementation tools such as MAP and PAR will run from command line.

To work around this problem, launch ISE first (ise &<ENTER>), then run /usr/dt/bin/sdtaudiocontrol &<ENTER>.

After sdtaudiocontrol has been run once in a login session, you must exit the current login session before launching ISE again. (This is true even if you exit sdtaudiocontrol.)
AR# 15764
日期 03/19/2006
状态 Archive
Type 综合文章
的页面