UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1583

Foundation Schematic: Viewlogic Import error - cannot connect wire to symbol

Description

Keywords: viewlogic import schematic connect wire

Urgency: Standard

General Description:
After importing a Viewlogic schematic, you may see one or
more lines like this in the vlimport.log file:

Warning:
Schematic 'CONTROL': cannot connect wire to symbol 'FDRD'

解决方案

This error usually occurs when importing "very crowded'
schematics with lots of nets.

When there are too many obstacles between two pins that need
to be connected, the Foundation "autowire" process may not be
able to draw the net between these pins.


Solutions:

By looking at the Viewlogic schematic and the vlimport.log
file, you can add the missing nets manually after the import
process is complete.

OR

Before importing the Viewlogic schematic, make sure that
there are not too many obstacles between connected pins so
that the "autowire" process can resolve the connections
automatically.
AR# 1583
创建日期 12/10/1996
Last Updated 05/21/1999
状态 Archive
Type 综合文章