UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15850

5.1i Virtex-II PAR - MPPR crashes during the placement of the second cost table run

描述

Keywords: second, 2nd, second, cost, table, Phase 9.19

Urgency: Hot

General Description:
Multi Pass Place and Route (MPPR) crashes during placement at Phase 9.19, when the second cost table is run.

解决方案

This problem will be fixed in the 5.2i software, which will be available in February, 2003.

Meanwhile, you can work around this problem by setting the following environment variable:

PC:
set XIL_PAR_NO_DO_FDCOPT=1

Workstation:
setenv XIL_PAR_NO_DO_FDCOPT 1

Setting this variable disables the algorithm causing the failure. This should not affect results significantly.
AR# 15850
日期 10/23/2008
状态 Archive
Type 综合文章
的页面