UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15956

5.1i iMPACT, System ACE CF - When I attempt to program a JTAG chain containing a Virtex-II/Pro device, configuration fails (svf2ace)

描述


General Description:

I cannot use the System ACE CF controller to program Virtex-II and Virtex-II Pro devices with ".ace" files generated by the following versions of iMPACT:

- 5.1i

- 5.1i/Service Pack 1

- 5.1i/Service Pack 2

- 5.1i/Service Pack 3



Programming the JTAG chain via the TSTJTAG port (bypassing the System ACE CF device) using any 5.1i version of iMPACT is successful.

解决方案


5.1i iMPACT with Service Pack 3 is generating faulty .ace files due to an SVF file generation problem for Virtex-II and Virtex-II Pro devices (iMPACT automatically generates the .ace file from the .svf file using the svf2ace translator).



A patch is available on the Xilinx FTP site to correct this problem. This patch should only be used with 5.1i/Service Pack 3. Please view the archived README file for installation instructions:

http://www.xilinx.com/txpatches/pub/swhelp/ise5_updates/161822_51isp3.zip


The System ACE CF file generation problem is fixed in 5.2i iMPACT, which will be available in late February, 2003.

http://www.support.xilinx.com/support/software/install_info.htm
AR# 15956
日期 06/22/2011
状态 Archive
Type 综合文章
的页面