We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15992

3.1 EDK - Is it possible to install the EDK tools on a machine without installing the ISE 5.1i software?


Keywords: EDK, install, ISE

Urgency: Standard

General Description:
I am a software/firmware engineer, and the ISE 5.1i Software is not installed on my system. I am interested only in developing software applications for the Virtex-II Pro PowerPC or MicroBlaze. Is it possible to install the EDK tools without the ISE 5.1i software?


The EDK tools cannot be used without the ISE 5.1i software. EDK 3.1 needs XST and the back-end tools in order to run hardware platform development, and the iMPACT DLLs are needed to run XMD for debugging.

We recommend the use of the following installation options:

- Use the full XILINX back-end tools when EDK is used to generate hardware.
- Only iMPACT is required for software application development.
AR# 15992
日期 04/28/2006
状态 Archive
Type 综合文章