UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16028

11.1 XST - "ERROR:HDLCompilers:26 - design_name.prj line xx expecting 'endmodule', found 'EOF'"

描述

Keywords: XST, HDLCompilers:26, synthesis, endmodule, EOF, Verilog, Unicode, Asian, Japanese, Koeran, Chinese

Urgency: Standard

General Description:
When I run a design in XST, the following error is reported:

"HDLCompilers:26- design_name.prj line xx is expecting 'endmodule', found 'EOF'."

解决方案

This problem occurs if a synthesis/compiler directive in one of your Verilog modules has not been closed.

For example, a //synthesis translate_off directive without the corresponding translate_on will trigger this error. An `ifdef that is used without a `endif will also cause the error.

When using a computer system with an Asian character set this erro may occur due to a "space" character which uses two bytes.
AR# 16028
日期 09/14/2009
状态 Archive
Type 综合文章
的页面