We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16317

5.1isp3 iMPACT - iMPACT is unable to detect the MultiPRO cable and reports "Configuration Mode not supported by the selected download cable"


Urgency: Hot

General Description:

When iMPACT attempts to detect a MultiPRO cable, the following error message is reported:

"Configuration Mode not supported by the selected download cable."

iMPACT is unable to connect to the MultiPRO cable.


A patch is available to correct this problem. This patch must be applied only to the 5.1i software with Service Pack 3. (5.1i Service Pack 3 is available at: http://support.xilinx.com/support/techsup/sw_updates.)

Download the archived patch at the link below and follow the instructions in the included README file:


AR# 16317
日期 12/15/2012
状态 Active
Type 综合文章