UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16556

LogiCORE SPI-4.2 (POS-PHY L4) v5.2 - MAP reports: "Fatal_Error: Pack: pktbafirewall.c: 138:1.1- Failed to create device helper..."

描述

General Description

When I run a design with a PL4 core on my PC in ISE 5.1i Service Pack 3 MAP, the following error is reported:

"FATAL_ERROR: Pack:pktbafirewall.c:138:1.1 - Failed to create device helper Process will terminate. To resolve this error, please consult the Answers Database and other online resources at http://support.xilinx.com. If you need further assistance, please open a WebCase by clicking on the "WebCase" link at http://support.xilinx.com."

This error does not occur on UNIX machines.

解决方案

If you are using the "-timing" switch in MAP, try running MAP without using this switch.

If you are running "imlement.bat" (which is provided with the PL4 design example), please remove the "-timing" switch.

If your design cannot meet timing after the "-timing" switch is removed, please contact Xilinx Customer Support at:

http://www.support.xilinx.com/support/clearexpress/websupport.htm

AR# 16556
日期 05/03/2010
状态 Archive
Type 综合文章
的页面