UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16916

3.1 EDK OPB_DDR/PLB_DDR - Can I alias the memory space?

描述

General Description: 

I am trying to determine the C_BASEADDR and C_HIGHADDR parameter values and I have a related question: 

Is it possible (using this OPB_DDR/PLB_DDR) to map 256 MB (0x0000_0000 to 0x0FFF_FFFF) of memory space for DDR SDRAM while only having 64 MB of physical DDR SDRAM present?

解决方案

For a 256 MB memory space to alias 64 MB physical memory, you can set C_BASEADDR = 0x0000_0000 and C_HIGHADDR = 0x0FFF_FFFF. Also, there is a section in the DDR design specification that describes how the DDR address is sliced from the PLB/OPB address bus. Refer to the section "Connecting to Memory" -> "Memory to FPGA Connections" -> "DDR Address Mapping".

AR# 16916
日期 05/15/2014
状态 Archive
Type 综合文章
的页面