We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17348

6.1i iMPACT - I am unable to select both "Load FPGA" and "Parallel Mode"


Urgency: Hot 


General Description: 

In the 6.1i/5.2i iMPACT GUI, I cannot select the PROM options "Load FPGA" and "Parallel Mode" at the same time for the VQ44 and PC44 packages. When I select "Load FPGA", the "Use D4 for CF" option is automatically selected. This is correct for only the SO20 and PC20 packages.


To work around this problem, manually add the PROM file when iMPACT is first launched (do not use "initialize chain"). If you use initialize chain first when opening iMPACT, you must close and re-open iMPACT, and then manually add the device before the correct option selections are available.

AR# 17348
日期 05/15/2014
状态 Archive
Type 综合文章