We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17388

8.1i MAP - The physical representation of a latch (as seen in FPGA Editor) appears to have an inverted Gate signal


When I am examining the implementation of a latch (LD or LD_1) in FPGA Editor, it can appear that the Gate signal has been improperly inverted. This is because the hardware representation seen in FPGA Editor is an LD_1. It is therefore correct for an LD to have an inversion added to the Gate signal and for an LD_1 to have an inversion removed from the Gate signal.


Simulation can be used to verify that the physical design is logically correct.

AR# 17388
日期 05/15/2014
状态 Archive
Type 综合文章