We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17390

Xtreme DSP Development Kit - Fixed Power Supplies (FPS) are shutting down (folding back) due to large current demand from the FPGA


Urgency: Hot 


General Description: 

As an Xtreme DSP Kit user, I sometimes reach the limit of the +1.5V core linear voltage regulator used on the power modules incorporated into the Xtreme DSP Kit mother board. 


In demanding applications, the XC2V2000 and XC2V3000 parts may require more current than the maximum that can be supplied by the FPS (Fixed Power Supply) power module. In high utilization or high frequency designs, you may see the +1.5V FPS fold back or shut itself off due to the thermal limits of the device. When the FPS shuts off, the FPGA configuration is eliminated.


You need to replace the FPS with a Programmable Power Supply (PPS). For further technical details on this problem, please consult the following application note: 


AR# 17390
日期 05/15/2014
状态 Archive
Type 综合文章