UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17452

6.1i XPower - When running from the command line, the "-tb" switch must immediately follow the "-s" switch; Error reported: "error: Portability90"

描述

When running from the command line, the "-tb" switch must immediately follow the "-s" switch. Failure to do so results in an error message similar to the following: 

 

"ERROR: Portability90: the -tb switch is not allowed."

解决方案

One solution is to use these two switches in the correct order: "-s" followed by "-tb" with no switches in between. 

 

Example

 

xpwr top.ncd -x top_xpwr.xml -wx top_xpwr.xml -s /home/temp/abc.vcd -tb 100 ps -o top.pwr top.pcf 

 

This will be fixed in the next major release of the software.  

 

Note 1: The -tb switch does not work with ".xad" sim data files. 

Note 2: The -tb switch is currently deprecate and will be made unavailable in 10.1.

AR# 17452
日期 05/15/2014
状态 Archive
Type 综合文章
的页面