UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17454

11.1 RTL/Technology Viewer - In the RTL Viewer an instantiated core does not appear to be connected

描述

When I view a schematic of my design in the RTL Viewer, a core that was instantiated in the design does not show nets connected to the symbol representing the core.

解决方案

This is typically a visual-only problem that occurs during the creation of the RTL schematic.

To verify that a core has been connected correctly after implementation, use the FPGA Editor.

If you are using ISE design tools 6.2i or earlier, a possible cause of the "missing nets" in the RTL view is related to the "Read Cores" option for XST. When this option is selected ("On"), the core will not be connected in the RTL view. You can resolve this issue by unchecking this option and running synthesis again. After you perform these steps, the core will be connected.

If you are experiencing this problem while using the latest software version, please report any missing or incorrect connections to Xilinx Technical Support and provide a test case if possible.

AR# 17454
日期 12/15/2012
状态 Archive
Type 综合文章
Tools
  • ISE Design Suite - 11.1
的页面