UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17493

6.1i PACE - After I assign pins in the Constraints Editor, PACE gives errors and removes the constraints

描述

Keywords: PACE, constraints, editor, pins

Urgency: Standard

General Description:
When I use the Constraints Editor to create physical constraints in the UCF, PACE does not display these new constraints. After reading in the UCF, PACE also deletes the constraints.

解决方案

When the Constraints Editor writes out bus delimiters, they are based upon the NGD. When PACE reads in this bus delimiter, it does not understand this, and thus removes these constraints from the UCF. If you have PACE read in the NGD file, this issue should not be a problem. You can also open the " __pace.ucf" file in the working directory, which is the backup file of the original UCF.
AR# 17493
日期 03/27/2007
状态 Archive
Type 综合文章
的页面