We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17687

LogiCORE SPI-4.2 (POS-PHY L4) v6.0 - Speed file patches needed to avoid timing violations on SPI-4.2 v6.0 cores


General Description: 

This Answer Record explains why speed file patches are needed for SPI-4.2 v6.0 cores.


For Virtex-II devices: 

If you are performing gate-level (post-NGD, or post-timing) simulation using VHDL simulator and you are running the SysClk faster than 300 MHz, you might see "x" or unknown state appearing on the TDClk output due to pulse-swallowing. 


For Virtex-II Pro devices: 

If you are using an SPI-4.2 core and are using a -6 or -7 Virtex-II Pro device, you may have a problem meeting SPI-4.2 timing constraints. 


For the above two issues, please download and install the appropriate speed files: 

Virtex-II: http://www.xilinx.com/txpatches/pub/swhelp/speed_files/2v1-116.zip  For more information, please see (Xilinx Answer 17716)  

Virtex-II Pro: http://www.xilinx.com/txpatches/pub/swhelp/speed_files/2vp1-81.zip  For more information, please see (Xilinx Answer 17719)

AR# 17687
日期 05/15/2014
状态 Archive
Type 综合文章