UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17983

Virtex-II/-II Pro /4/5 DCM - What is the default value of STATUS(2) bit if CLKFX is not used?

描述

When CLKFX is not used in my design, what is the value on the STATUS[2] bit?

解决方案

When CLKFX is not used in the design, STATUS[2] bit of the DCM is always a "don't care".

Xilinx has observed on silicon a default value of "1" when CLKFX is unused. Xilinx does not test STATUS[2] bit values when the CLKFX is not used and cannot guarantee this value.

Xilinx strongly recommends not using the STATUS[2] bit in your design if the CLKFX outputs of the DCM are unused.

AR# 17983
日期 12/15/2012
状态 Active
Type 综合文章
的页面