We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17992

Map Error: Pack:679 - "Unable to obey design constraints; MicroBlaze v2.00.a built with OPB-only configuration fails"


Keywords: Map, Error, Microblaze, RLOC, Design Constraints

Urgency: Standard

General Description:
MicroBlaze built with configuration 5 (I and D OPB w/ OPB2OPBlite bridge) fails map with Pack error:

"ERROR:Pack:679 - Unable to obey design constraints (MACRONAME=microblaze_0,
RLOC=R-7C12.S0) which require the combination of the following symbols into a
single SLICE component:
LUT symbol "microblaze_0/microblaze_0_i/dopb_interface_i/dopb_dready_i"

This error is generated when the MicroBlaze system contains no LMB memory.


This issue will be resolved in the 6.1 EDK Release. Until that time, add the following constraint to your UCF file:

INST "microblaze_0/microblaze_0_i/dopb_interface_i/dopb_dready_i" USE_RLOC = FALSE ;

NOTE: You will need to update the path based upon the error message map prints.
AR# 17992
日期 04/25/2007
状态 Archive
Type 综合文章