UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

的页面

AR# 1800

FPGA Compiler - Wire load not found "parttype-s_wc"

Description

The FPGA Compiler command set_wire_load "parttype-s_wc" causes the following error:

Wire load not found "parttype-s_wc"

解决方案

This is caused by the link and target libraries in the .synopsys_dc.setup file not being set to the part that is being targeted. The example setup file fc4k.synopsys_dc.setup in $ds401/examples/synopsys looks like:

target_library = {xprim_4005-5.db xprim_4000-5.db xgen_4000.db \ xio_4000-5.db xfpga_4000-5.db}

If the xprim_4005-5 is missing, or the wire load is being set for a different part, you will receive this error.

Set the xprim_####-#.db in the link and target libs in the setup file to the correct part and speed grade. Make sure that the link and target are identical.

AR# 1800
日期 02/25/2014
状态 Archive
Type 综合文章