UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18012

Spartan-3 - Can I program an XC3S50J ES part with ISE 6.1i? Are the bitstreams compatible with the XC3S50?

描述

Can I program an XC3S50J ES part with ISE 6.1i? Are the bitstreams compatible between the XC3S50J and the XC3S50?

解决方案

No, you cannot program an XC3S50J ES part with ISE 6.1i. The bitstreams are not compatible between these two parts. 

 

The XC3S50 production part has enhanced architectural features and the bitstream is larger. To program the ES XC3S50J, you must use ISE 5.2.03i. For the XC3S50, you must use ISE 6.1i or later.  

 

Programming either part with the incorrect software version will cause a configuration error, but it will not damage the FPGA.

AR# 18012
日期 05/08/2014
状态 Archive
Type 综合文章
的页面