UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18051

6.1 EDK - XMD fails to connect to correct processor number

描述

Keywords: XMD, PPC, XPS, EDK

Urgency: Standard

General Description:

On the ML300 demonstration platform, when doing a

XMD% ppcc -debugdevice devicenr 2

the following error occurs

"JTAG chain configuration
--------------------------------------------------
Device ID Code IR Length Part Name
1 0a001093 8 System_ACE
2 0124a093 10 XC2VP7
error: cannot debug CPU 256 on device 2 (XC2VP7). The number of available CPUs is 1.
Unable to establish connection to the PowerPC target."

XMD should correctly determine that for a 2VP7 the default processor number is 1 and not 256.

解决方案

This problem is fixed in the latest 6.1 EDK Service Pack, available at:
http://www.xilinx.com/ise/embedded/edk.htm.
The first service pack containing the fix is EDK 6.1 Service Pack 1.

AR# 18051
日期 03/07/2006
状态 Archive
Type 综合文章
的页面