We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18093

6.1i CORE Generator - Design with CORE Generator modules fails synthesis "ERROR:HDLParsers:3312....Undefined symbol 'xxx'."


A schematic or HDL design containing CORE Generator modules might fail during synthesis with an error similar to the following:

"ERROR:HDLParsers:3312 - D:/cases/..../sig.vhd Line 207. Undefined symbol 'C_ADDSUB_V6_0'. Undefined symbol 'LUT4'."

XST is starting to synthesis the behavioral VHDL file, hence the complaint. If the XCO file is removed from the project, then the synthesis goes through with no problems.


This problem can be caused by a specific set of Xilinx Cores which have a syntax error in the wrapper file ("<core_name>.vhd").

The "<core_name>.vhd" file contains component instantiations that are only for synthesis and should be surrounded by the translate on/off statements. However, the translate on/off statements were misplaced and only surround the library definitions.

To work around this issue, place translate on/off around the entire source (from just after BEGIN in the architecture, to just above "end xilinx"). This prevents XST from synthesizing these simulation instantiations and allows XST to complete.

This problem has been fixed in the 6.1i CORE Generator IP update #1 (G_IP1).
AR# 18093
日期 02/17/2011
状态 Archive
Type 错误信息