UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18397

XST - "WARNING:Xst:1293 - FF/Latch <my_flop> is constant in block <my_block>"

描述

Keywords: INIT, synthesize, optimization

When I synthesize a design with XST, the following warning occurs:

"WARNING:Xst:1293 - FF/Latch <my_flop> is constant in block <my_block>."

解决方案

This warning occurs when a register with an INIT value has a constant input that matches the INIT value and no other control signal (such as a local set/reset). The constant input might be due to an undriven input or logic optimization.

To avoid the warning, examine the logic value and/or trimming at the input signal of the register to be sure no unexpected optimization has been done.
AR# 18397
日期 01/08/2009
状态 Active
Type 综合文章
的页面