", the following properties are undefined..."">

UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18406

8.1i NGDBuild - "INFO:NgdBuild:526 - On the RAMB4_S16_S16 symbol "", the following properties are undefined..."

描述

When implementing a design that contains block RAM, I might receive the following message during Translate: 

 

"INFO:NgdBuild:526 - On the RAMB4_S16_S16 symbol "<RAMB>", the following properties are undefined: INIT_00, INIT_01, ..., INIT_0F. A default value of all zeroes will be used."

解决方案

This message occurs if you have instantiated a block RAM component in your HDL source and have not assigned initial values for all the addresses in the RAM. This should not appear for schematic designs, because ECS creates initialization strings of all zeros for all memory elements (unless otherwise directed). 

 

Assign these INIT values in your HDL source, XCF file (for XST), or UCF file to initialize the RAM components and avoid this message.

AR# 18406
日期 05/16/2014
状态 Archive
Type 综合文章
的页面