hinders the constant cleaning in the block ..."">

UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18424

XST - "WARNING:Xst:1426 - The value init of the FF/Latch hinders the constant cleaning in the block ..."

描述

When I am synthesizing a design with XST, the following warning occurs:

"WARNING:Xst:1426 - The value init of the FF/Latch <my_flop> hinders the constant cleaning in the block <my_block>.

You should achieve better results by setting this init to 0."

解决方案

This warning occurs when a register with an INIT value (the initialization value that a memory element has when the FPGA is powered on) has a constant input that does not match the INIT value and no other control signal (such as a local set/reset). The constant input might be due to an undriven input or logic optimization.

To avoid the warning, examine the logic value and/or trimming at the input signal of the register. If the values of the input and INIT match, XST will be able to optimize the registers using constant optimization.

For more information about INIT please refer to the Constraints Guide:

http://support.xilinx.com/support/software_manuals.htm

For more information on inferring INIT values in HDL, please refer to (Xilinx Solution 15149).

AR# 18424
日期 12/15/2012
状态 Active
Type 综合文章
的页面