AR# 1843


QuickSim: Mode pins (MDO, MD1, MD2) cannot be used in board-level simulation.


Keywords: mode pins, MD0, MD1, MD2, board-level, pads

Urgency: Standard

General Description:

A board level simulation of a design that contains mode pins (MD0, MD1,
MD2) will not accept any force to the nets connected to these pins. The
waveform will only show strong contention on the signals.


The only workaround is to remove the mode pins from the design and replace
them with standard I/O pads.
AR# 1843
日期 10/01/2008
状态 Archive
Type 综合文章
People Also Viewed