We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18467

6.1i ISE - Leonardo synthesis gives Error: "Could not find wire table: xcv2p-p20-5_avg"


Keywords: tcl, Mentor, Leonardo, synthesis, wire, table, Spectrum

Urgency: Standard

General Description:
When using a Virtex2Pro 50 device and Leonardo synthesis, the Leonardo script in Project Navigator executes the command "set wire_table xcv2p-p20-5_wc" which causes the message: "Could not find wire table: xcv2p-p20-5_avg" and at the end, ProjNav could not finish.


Mentor has identified the problem in the script "leospec_utils.tcl".
In file "leospec_utils.tcl", change the following line to the line under it:

xcv2p { regexp {xc2vp(.*)} $p_DevDevice match p_DevSize ; set wire_table "${target}-p$p_DevSize${p_DevSpeed}_avg" }
xcv2p { regexp {xc2vp(.*)} $p_DevDevice match p_DevSize ; set wire_table "${target}-$p_DevSize${p_DevSpeed}_avg" }

This problem has been fixed in the latest 6.1i Service Pack available at:
The first service pack containing the fix is 6.1i Service Pack 3.
AR# 18467
日期 02/07/2006
状态 Archive
Type 综合文章