We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18483

6.1i FloorPlanner - FloorPlanner crashes when I try to exit on PC


Keywords: AREA_GROUP, crash, dump, PC, read, UCF

Urgency: Standard

General Description:
When I use 6.1.02i software (on PC only), Floorplanner crashes when I try to exit. I created an AREA_GROUP for my logic, had Floorplanner write out the UCF, and then exited Floorplanner. Then, when I reloaded the design in FloorPlanner and read in the UCF that FloorPlanner had recently written out, and then tried to exit the tools, they crashed.


This issue was caused by a bug in Service Pack 2 for 6.1i (6.1.02i) and occurs on PC only. This issue is fixed in a service pack for the 6.1i software. The service pack containing the fix is SP3 (6.1.03i).

This problem has been fixed in the latest 6.1i Service Pack available at:
The first service pack containing the fix is 6.1i Service Pack 3
AR# 18483
日期 02/21/2007
状态 Archive
Type 综合文章