UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18532

6.1 EDK, SimGen - An error reports: "*** No rule to make target `-p', needed by `implementation/mblaze_wrapper.ngc'..."

描述

Keywords: XPS, structural simulation

Urgency: Hot

General Description:
When I generate a structural simulation netlist, the following error occurs:

"Command: "i:\builds\EDK\nt\xygwin61\bin\bash.exe -c "xps -nw < run_simmodel.cmd" "
XPS% XPS% XPS% XPS% XPS% XPS% make: *** No rule to make target `-p', needed by `implementation/mblaze_wrapper.ngc'. Stop.
XPS% No changes to be saved in MSS file."

解决方案

This problem is fixed in the latest 6.1 EDK Service Pack, available at:
http://www.xilinx.com/ise/embedded/edk.htm.
The first service pack containing the fix is EDK 6.1 Service Pack 2.
AR# 18532
日期 03/07/2006
状态 Archive
Type 综合文章
的页面