UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18619

6.1 / 6.2 EDK - "ERROR:Xflow:198 - Design system.ngc doesn't exist, or design extension is not valid"

描述

Keywords: EDK, XPS, ERROR, Xflow, Xflow, NGC, Alliance

Urgency: Standard

General Description:
When I run "Tools -> Generate Bitstream" in EDK, the following errors are issued:

"xflow.exe -wd implementation -p XC2VP7FG456-6 -implement fast_runtime.opt"
system.ngc
ERROR:Xflow:198 - Design system.ngc doesn't exist, or design extension is not valid.
ERROR:Xflow:11 - 1 error(s) found while processing cmdline arguments. Aborting flow ....
ERROR:Xflow:38 - Command Line errors... Aborting!
make: *** [implementation/system.bit] Error 1
Done."

解决方案

These errors occur because ISE Alliance is installed, and this software does not include "xst.exe".

In order for EDK to complete the bitstream generation process, you must synthesize the "system.vhd" or "system.v" file with a third-party synthesis tool. Then, copy the resulting netlist to the "<project_directory>\implementation" directory.
AR# 18619
日期 03/07/2006
状态 Archive
Type 综合文章
的页面