UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18627

5.2i Modular Design - "ERROR:XdmHelpers:819 - Modular design: Initial mode must have at least one inactive module"

描述

Keywords: 6.1i, ISE, ngdbuild, -modular, active, black box, implement, top

Urgency: Standard

General Description:
When running modular design, the following error occurs when running ngdbuild -modular initial:

"ERROR:XdmHelpers:819 - Modular design: Initial mode must have at least one inactive module."

解决方案

Check to make sure there is at least one black box in your top-level design that has an absent netlist.

Because this is Modular Design, NGDBuild is not expecting to find a fully linked design, but rather one or more unexpanded blocks (which are presumed to be inactive modules). The initial budgeting phase should be run with each module's netlist absent.
AR# 18627
日期 01/19/2006
状态 Archive
Type 综合文章
的页面