We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18631

OPB 10/100 Ethernet MAC v1.00.m - Release Notes for EDK 6.1i SP2


Keywords: OPB, EMAC, Ethernet, 10, 100, EDK, VxWorks, multicast packets

Urgency: Standard

General Description:
This Answer Record describes improvements made in the OPB 10/100 Ethernet MAC in EDK 6.1i Service Pack 2.


As of EDK 6.1i SP2, the VxWorks adapter now supports the sending and receiving of multicast packets. (Please note that hardware and software do not support filtering on multicast addresses.)

The following issues have been fixed in the EDK 6.1i SP2 release of v1.00.m of the OPB 10/100 Ethernet MAC core:

- The core did not respond correctly to a packet with a bad or missing End Of Stream character.
- In certain circumstances, the core did not respond correctly to a late collision occurring at the very end of a packet.

The following enhancement have also been made:

- A more precise collision response.
- A parameterizable MII interface clock frequency generation.
- Support of multicast receive without using promiscuous address mode.

These fixes are provided in the latest 6.1i EDK Service Pack, available at:
The first service pack containing the fix is EDK 6.1i Service Pack 2.
AR# 18631
日期 02/10/2008
状态 Archive
Type 综合文章