UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1867

M1.4: TRCE: IOB register to PAD paths (and vice-versa) are not reported or controlled

Description

General Description: TRACE does not report timing-related data associated with PADS and

FLIP FLOPS when the flip flop is contained (implemented) in an IOB component. This

occurs for both for explicit instantiations of IFFs and OFFs and for flip flops packed

into an IOB during the mapping process (controllable with the -pr switch).

解决方案

Workaround: The timing between the PAD and FF is fixed (and

known) for each device, but is not reported by TRCE. There is no known

workaround for having TRCE report these numbers, but the numbers reported in

the Data Book Guaranteed Input and Output Parameters are considered valid.

AR# 1867
创建日期 08/31/2007
Last Updated 01/18/2010
状态 Archive
Type 综合文章