We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18924

7.1i CPLDFit XC9500 CoolRunner/-II - "WARNING:Cpld:179 - The signal(s) '%s' are in combinational feedback loops"


When my design contains a combinational feedback loop, a message similar to the following occurs:

WARNING:Cpld:179 - The signal(s) 'test' are in combinational feedback loops.
These signals may cause hazards/glitches. Logic should include hazard reduction circuitry to avoid hazards/glitches. Apply the NOREDUCE parameter to the hazard reduction circuitry.


This warning message reminds you to check for glitches or hazards. Hazard reduction circuitry is redundant in logic optimization. 

To prevent the CPLD Fitter from optimizing this redundant logic away, add a NOREDUCE attribute to the equation to instruct the CPLD Fitter to not optimize this equation.

For more details on applying the NOREDUCE attribute, see the "Constraints Guide", which can be accessed at: 


AR# 18924
日期 06/13/2017
状态 Active
Type 综合文章
  • CPLD Device Families