AR# 18949

|

Virtex-II/-II Pro, XCITE/DCI - I have accidently pulled VRN to GND and VRP pulled to VCCO. Is the device damaged?

描述

General Description:

I have accidently pulled VRN to GND and VRP pulled to VCC. Is the device damaged?

解决方案

No, the device is not damaged; however, DCI will not be functional.

This will affect DCI circuitry similarly to termination to an open circuit (infinite impedance) as described in the (Xilinx Answer 14196).

If you correct the problem by pulling VRP down to GND and pulling VRN up to VCCO, your DCI will work and the device will not be damaged.

AR# 18949
日期 12/15/2012
状态 Active
Type 综合文章
People Also Viewed