UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18972

LogiCORE 10-Gigabit Ethernet MAC v4.0 - Is there an alternative method to implement the XGMII DDR clocking to reduce the number of BUFGs needed?

描述

General Description: 

When using the 10-Gigabit Ethernet MAC core with the XGMII interface, up to 7 BUFGs are needed. Is there any way to reduce the number of BUFGs necessary for the core?

解决方案

When using the 10-Gigabit Ethernet MAC core with the XGMII interface on Virtex-II Pro devices, (Xilinx XAPP685): "High-Speed Clock Architecture for DDR Designs Using Local Inversion Application" can be used to implement local clock inversion, which will reduce the number of BUFG's used.  

 

http://www.xilinx.com/xlnx/xweb/xil_publications_index.jsp?category=Application+Notes
 

Note that this is applicable only to Virtex-II Pro designs.

AR# 18972
日期 05/16/2014
状态 Archive
Type 综合文章
的页面