We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19110

6.1i iMPACT - iMPACT erases platform flash PROM XCF04S but fails blank check


General Description: 

When erasing a programmed XCF04S PROM with read-protect enabled, there are no errors. However, the following message occurs with a blank check: 


"'1': The device has 'read-protection' enabled. No read operations are allowed when in this mode. 

To disable read protection you must erase the device."


To work around this issue, erase the device again.  


This problem has been fixed in the latest 6.2i Service Pack available at: 

The first service pack containing the fix is 6.2i Service Pack 1.

AR# 19110
日期 05/16/2014
状态 Archive
Type 综合文章