UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19150

Virtex-II Pro RocketIO - What is the termination set to before power is applied, after power is applied (before configuration), and after configuration?

描述

What is the RocketIO transceiver termination set to before power is applied, after power is applied (before configuration), and after configuration?

解决方案

Unpowered: set to 75 ohms.

Powered, not configured, or during configuration: set to 50 ohms.

During configuration: TXP/TXN does not drive; the outputs remain at VTTX (through 50 ohm termination).

AR# 19150
日期 06/20/2017
状态 Active
Type 综合文章
器件
  • Virtex-II Pro
的页面