UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19278

6.2 EDK - ACE file generation prints a great deal of debugging output on Linux (SVFFile::shiftDR)

描述

Keywords: EDK, XMD, GENACE.TCL, ACE, SVF, Debug

Urgency: Standard

General Description:
When I generate an ACE file with:

xmd genace.tcl -jprog -board ml300 -elf ../linux/arch/ppc/boot/images/zImage.embedded -hw implementation/download.bit -ace top.ace

a great deal of debugging output is printed to the screen:

SVFFile::shiftDR(device=0, bitCount=33, mode=W, exitState=JTAG_RUN_TEST_IDLE)

解决方案

This problem is fixed in the latest 6.2 EDK Service Pack, available at:
http://www.xilinx.com/ise/embedded/edk.htm.
The first service pack containing the fix is EDK 6.2 Service Pack 1.
AR# 19278
日期 04/09/2007
状态 Archive
Type 综合文章
的页面