UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19325

LogiCORE 10 Gigabit Ethernet MAC v4.0 - Problems with MDIO Access / MDIO_IN should be wired to '1', not '0' in Demo Testbench

描述

General Description: 

When the 10 Gigabit Ethernet MAC v4.0 core is implemented with the XAUI interface, the demo testbench (demo_tb.v or demo_tb.vhd) incorrectly has "mdio_in" tied to '0'. In turn, this will not allow access through the MDIO interface.

解决方案

In order for the internal MDIO interface between MAC and XAUI to operate, "mdio_in" must be wired to '1'. Therefore, change the assignment of "mdio_in" from '0' to '1' in the demo testbench to correct this.

AR# 19325
日期 05/16/2014
状态 Archive
Type 综合文章
的页面