We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19367

LogiCORE FIFO Generator v1.1- In the GUI, I cannot change the component name and data width fields


General Description: 

When trying to customize or edit the GUI parameters, I cannot always change the editable fields after I have started parameter selection. When I click on the editable field, there is no cursor, and I cannot type in any information. The affected fields are as follows: 


Component Name  

Input Data Width 

Read Data Count Width 

Write Data Count Width


To work around this issue, try one of the following: 


- Close the GUI, re-open, and repeat the parameter selection. 

- Go to another GUI page and modify other parameters, go back to the previous page, and see if you can edit the component name field.

AR# 19367
日期 05/16/2014
状态 Archive
Type 综合文章