UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19411

6.2 ChipScope Pro - Programming the FPGA with ChipScope Analyzer failed

描述

General Description: 

When using ChipScope Analyzer to program the FPGA, I receive an error indicating that the JTAG chain is lost, or that the Done signal did not go High.

解决方案

To work around this problem, try using iMPACT 6.2i to program the FPGA: 

 

1. Run iMPACT to program the FPGA. 

2. Exit iMPACT. 

3. Run ChipScope Analyzer.

AR# 19411
日期 05/16/2014
状态 Archive
Type 综合文章
的页面